1. Home
  2. Hikvision
  3. Hikvision DS-PS1-I-WE\/B User Manual
  4. Page 2

Hikvision DS-PS1-I-WE\/B AX Pro DS-PS1-I-WE/B Wireless Indoor Sounder - Blue

DS-PS1-I-WE/B User Manual - Page 2

For DS-PS1-I-WE\/B.

PDF File Manual, 4 pages, Read Online | Download pdf file

DS-PS1-I-WE\/B photo
Loading ...
4
Enrollment
5
Installaon
1. Remove the screw on the boom of the sounder, and disassemble the peripheral and remove the rear panel.
Note:
for re-enrollment, you need to hold the tamper buon while powering the peripheral on simultaneously.
For power on again, push the power swith to ON at least 5 s aer power off.
2.Loosen the set screw at the boom of the sounder and remove the front panel.
-The addional force shall be equal to three mes the weight of the equipment but not
less than 50N. The equipment and its associated mounng means shall remain secure
during the installaon. Aer the installaon, the equipment, including any associated
mounng plate, shall not be damaged.
-Install the device on the place with nonflammable surface, such as concrete wall.
!
2
ON
OF F
ON
OF F
Enroll the Peripheral Locally
Enroll the Peripheral with APP
1. In the APP, tap the "Enrollment Mode" buon on the control panel page to make the control panel enter the enroll-
ment status.
2. Push the power switch of the peripheral to on, and it will be automacally enrolled to the control panel.
1. In the APP, tap the icon "+"and scan the QR code on the peripheral or enter the serial No. (Last 5 digit) of the peripheral.
2. Push the power switch of the peripheral to on, and it will be automacally enrolled to the control panel.
2. Log in to the APP Store, download and install App.
3. Power on the security control panel.
4. Log in the APP and tap the icon "+" . Scan the QR code or input the control panel serial No. (Last 5 digit) to add the
control panel.
5. Enroll the peripheral locally, with OR code, or with serial No..
1. Check signal strength and select installaon place
Enter the signal checking mode by operang on the control panel.
Signal indicator turns green for 3 s: Strong.
Signal indicator turns orange for 3 s: Medium.
Signal indicator turns red for 3 s: Weak.
Signal indicator flashes red for 3 s: Lost.
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
Loading ...
Loading ...