Loading ...
Loading ...
Loading ...
Table 13-2 Linkage Method Descripon
Linkage Method Descripon
Nofy Surveillance
Center
The device can send an excepon or alarm signal to the remote
alarm host when an event occurs. The alarm host refers to the PC
installed with client soware (e.g., iVMS-4200, iVMS-5200).
Alarm Pop-Up Window When an alarm is triggered, the local monitor displays the alarm
pop-up window.
Buzzer When an alarm is detected, the buzzer will make an audible beep.
Send Email The system can send an email with alarm informaon to a user or
users when an alarm is detected.
Alarm Output The alarm output can be triggered by the alarm input, moon
detecon, video tampering detecon, face detecon, line crossing
detecon, and any all other events.
Record When an alarm is detected, the selected channel would record
videos.
Note
Video recording schedule shall be enabled for the channel,
otherwise this linkage would be invalid. You can go to System →
Storage Management → Storage Schedule → Video Recording to
congure video recording schedule.
8. Click Save.
13.1.2 Perimeter
Protecon
Perimeter protecon events include line crossing detecon, intrusion detecon, region entrance
detecon, and region exing detecon.
Congure
Line Crossing Detecon
Line crossing detecon detects people, vehicles, and objects crossing a set virtual line. The
detecon direcon can be set as bidireconal, from le to right or from right to le.
Before You Start
If your device supports AI by NVR
funcon, and its corresponding funcons are required, please go
to System → Smart Sengs → Algorithm Conguraon → Algorithm Management to enable
Perimeter
Protecon algorithm.
Network Video Recorder User Manual
50
Loading ...
Loading ...
Loading ...