Loading ...
Loading ...
Loading ...
4. Click Save.
4.2.5 Enable ISAPI
ISAPI (Internet Server Applicaon Programming Interface) is an open protocol based on HTTP,
which can realize the
communicaon between the system devices (e.g., network camera, NVR,
etc.).
Go to System → System Sengs → Network → Plaorm Access → ISAPI to enable the funcon.
4.2.6 Congure ONVIF
ONVIF protocol allows the connecon with third-party cameras. The added user accounts have the
permission to connect other devices via ONVIF protocol.
Steps
1. Go to System → CX → System Sengs → Network → Plaorm Access → ONVIF .
Figure 4-9 ONVIF
2. Turn on Enable.
3. Select an authencaon type.
4. Click Add to add a user.
5. Set the user name and password.
Cauon
We highly recommend you create a strong password of your own choosing (Using a minimum of
8 characters, including at least three of the following categories: upper case leers, lower case
leers, numbers, and special characters.) in order to increase the security of your product. And
Network Video Recorder User Manual
13
Loading ...
Loading ...
Loading ...