Loading ...
Loading ...
Loading ...
2N TELEKOMUNIKACE a.s., www.2n.cz 21/117
2.2 Quick installation guide
Remove the cover from the walled-in flush mounting box. Remove 2N Indoor View
®
the pre-prepared cabling, UTP cable, doorbell twin cable and power supply cable.
Shorten the cables to 150 mm or less as required. Connect the doorbell twin cable or
power supply cable to the connector provided. Crimp the RJ-45 connector onto the
UTP cable. Take and lean its bottom edge against the wall below the 2N Indoor View
®
flush mounting box. First plug the green power/doorbell connector. Connect the LAN
connector. Put the cables carefully in the pre-drilled back slot to 2N Indoor View
®
prevent them from blocking any horizontal levelling movement during the final
installation stage. Insert in the flush mounting box making sure that 2N Indoor View
®
Loading ...
Loading ...
Loading ...