Loading ...
Loading ...
Loading ...
8
①
③
②
④
5
Install a Hard Disk
The system may not include Hard Disk, it’s depending on the kit you selected. This system works with
most 3.5” SATA Hard Disk or 2.5” SATA Hard Disk.
Note: if your system has preinstalled hard disk, please skip this step.
Note:
After installing a hard disk, you need to first format the Hard Disk before recording.
Right click the mouse > go to Main Menu > Disk Management > Select the Hard Disk > Click Format >
Apply.
① Unplug your DVR from power, unscrew and remove the top cover.
② Connect the SATA power and data cables from the DVR to the corresponding ports on your hard
disk as shown.
③ Place the hard disk into the DVR. Any cable should cross up over the hard disk.
④ Holding the hard disk and the DVR, gently turn it over and line up the holes on the hard disk
with the holes on the DVR. Using a Phillips screwdriver, screw the provided screws into the holes.
Assemble the cover.
Loading ...
Loading ...
Loading ...