Loading ...
Loading ...
Loading ...
9.16 Power Output Mode
Set the external power supply method for 12 VDC power output of the device.
Go to Conguraon → System → System Sengs → External Device and set the Power Output
Mode.
Power Saving
The device can supply power to the external device through the power output interface only
when the device performs two-way audio or audio output, or triggers the audio output and
alarm output linkage method. At other mes, the device does not supply power to the external
device through the power output interface.
NO
Normally Open.
NC
Normally Close.
9.17 Locaon Sengs
Locaon displays and uploads the current longitude and latude of the device.
Auto Uploading
Check Enable and set Locaon Upload Interval.
The device will upload its locaon at the set interval. You can also click Refresh to upgrade the
device locaon manually.
Figure 9-1 Auto Uploading
Manual Sengs
Check Enable and set Locaon Upload Interval. Enter the longitude and latude of the device
and click Save.
The device will upload the set locaon at the set interval.
Network Camera User Manual
79
Loading ...
Loading ...
Loading ...