Loading ...
Loading ...
Loading ...
CAUTION: All servicing and
repair work on the machine
requires special training. This is
especially true of the machine′s
safety equipment. If your machine
fails any of the checks described
below you must contact your
service agent. When you buy any
of our products we guarantee the
availability of professional repairs
and service. If the retailer who sells
your machine is not a servicing
dealer, ask him for the address of
your nearest service agent.
To check the cutting attachment guard
WARNING: Do not use a
cutting attachment without an
approved cutting attachment guard.
If an incorrect or damaged cutting
attachment guard is installed this
can cause injury.
WARNING: If the cutting
attachment is attached to a battery
power unit, make sure that the front
guard is installed.
• Make sure that the cutting attachment
guard and front guard are not damaged.
Replace the cutting attachment guard and
front guard if they are damaged.
• Only use original spare parts.
To check the blade
The blade is designed and manufactured to
withstand the loads that edging of a lawn
involves.
• Check the blade for damage or cracks.
A damaged blade should always be
replaced.
Work position
• Hold the product with 2 hands.
• Hold the product on the right side of your
body.
• Keep the cutting attachment below waist
level.
• Keep body parts away from the hot
surfaces.
• Keep body parts away from the cutting
attachment.
To check the support flange
• Check that the support flange is not
cracked due to fatigue or due to being
tightened too much. Discard the support
flange if it is cracked.
To check the locknut
CAUTION:
The nylon lining
inside the locknut must not be so
worn that you can turn it by hand.
The lining should offer a resistance
of minimum 13 in-lb / 1.5 Nm. The
locknut must be replaced after it
has been put on approximately 10
times.
CAUTION: The locknut has a
left-hand thread. To tighten the
locknut to much can cause damage
to the threads.
The locknut secures the cutting attachment on
the output shaft. Protect your hand from injury
when assembling, use the cutting attachment
guard as protection when tightening with a
socket wrench.
2105 - 001 - 07.08.2023
9
Loading ...
Loading ...
Loading ...