Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/6643745-kx-tge675b/bg20.png)
Handset locator
Y
ou can locate a misplaced handset by
paging it.
1 Base unit: Press MLOCATORN or
MHANDSET LOCATORN.
R All registered handsets beep for 1
minute.
2 To stop paging:
Base unit:
Press MLOCATORN or MHANDSET
LOCATORN.
Handset:
n KX-TGE660 series: page 4
Press MOFFN.
n KX-TGE670 series: page 4
Press M
N,
then press MOFFN.
Cell locator
Available for:
K
X-TGE660 series (page 4)
This feature allows you to locate a misplaced
c
ellular phone by pressing the MLOCATES
CELLN button on the base unit and calling
your cellular phone. You must assign your
cellular phone’s phone number to the button
beforehand. Only 1 cellular phone number (24
digits max.) can be assigned.
Adding a phone number
1 MM
ENUN#248
R If you have already stored a cellular
phone number, the current number is
displayed.
2 Enter your cellular phone number. a
MSAVEN a MOFFN
Erasing the number
1 MM
ENUN#248
2 Press and hold MCLEARN until all digits
are erased. a MSAVEN a MOFFN
Calling the misplaced cellular phone
Base unit: MLOCATES CELLN
R To stop calling, press MLOCATES CELLN again.
Important:
R While the base unit is calling the cellular phone,
the outside line is used.
– Even if the cellular phone answers, you
cannot talk with the cellular phone and the
base unit beeps for 1 minute. To end the call,
press MLOCATES CELLN on the base unit.
Charges may be incurred if the cellular p
hone
answers the call.
Intercom
I
ntercom calls can be made:
– between handsets
– between a handset and the base unit
*1
*1 KX-TGE670 series: page 4
Note:
R When paging unit(s), the paged unit(s)
beeps for 1 minute.
R If you receive an outside call while talking
on the intercom, the interrupt tone sounds
(page 48).
– Handset: To finish intercom, press
MOFFN. To answer the call, press M
N
o
r MCELLN.
– Base unit: To finish intercom, press
MZN. To answer the call, press MZN
again or the corresponding cellular line
key (MCELL 1N or MCELL 2N).
R To change the handset ringer volume and
ringer tone for intercom, see page 48.
Making an intercom call
Handset
1 MM
ENUN a MbN: “Intercom” a
MSELECTN
2 MbN: Select the desired unit or “Voice
paging”. a MSELECTN
R If you select “Voice paging”, speak
into the microphone after the beep.
Your voice will be heard using the
speakers of the base unit
*1
and all
32
For assistance, please visit http://shop.panasonic.com/support
Locator/Intercom
TGE66xUSA(en)_1129_ver034.pdf 32 29/11/2017 3:09:15 PM
Loading ...
Loading ...
Loading ...