Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/6643745-kx-tge675b/bg1d.png)
Making cellular calls
Available for:
K
X-TGE670 series (page 4)
Important:
R T
he unit cannot be used to talk on 2 cellular
lines at the same time.
R Only 1 Bluetooth device can be used with
the unit at a time.
R Before making calls, confirm that the
corresponding CELL indicator on the base
unit lights up (page 17).
1 Press MCELL 1N or MCELL 2N.
2 Dial the phone number.
3 When the other party answers, speak into
the microphone.
4 When you finish talking, press MZN.
Note:
R While on a call, you can switch from the
base unit to the handset:
– Press MINTERCOMN on the base unit.
a Select the desired handset number
on the base unit. a Press M
N
on the
handset. a Press MZN on the base unit.
– If the handset is on the base unit, simply
lift it.
Adjusting the speaker volume
P
ress MjN or MkN repeatedly while talking.
Note:
R The speaker volume you set is kept for
each line (landline and cellular lines).
Redialing the last number dialed
1 P
ress MCELL 1N or MCELL 2N.
2 MREDIALN
Making landline calls
1 MZN
2 D
ial the phone number.
3 W
hen the other party answers, speak into
the microphone.
4 When you finish talking, press MZN.
Note:
R While on a call, you can switch from the
base unit to the handset:
– Press M
N on the handset, then press
MZN on the base unit with the call
sharing mode on (page 51).
– If the handset is on the base unit, simply
lift it.
Redialing the last number dialed
MZN a MR
EDIALN
Pause (for PBX/long distance service
u
sers)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 42).
Example: If you need to dial the line access
number “9” when making outside calls with a
PBX:
1 MZN
2 9 a MPAUSEN
3 Dial the phone number.
Note:
R A 3.5 second pause is inserted each time
MPAUSEN is pressed.
Answering calls
W
hen a landline call is being received, the
SP-PHONE indicator flashes rapidly.
When a cellular call is being received, the
CELL indicator and SP-PHONE indicator flash
rapidly.
1 Press MZN when the unit rings.
R You can also answer the cellular call
by pressing MCELL 1N or MCELL 2N.
2 Speak into the microphone.
3 When you finish talking, press MZN.
For assistance, please visit http://shop.panasonic.com/support
29
Making/Answering Calls Using the Base Unit
TGE66xUSA(en)_1129_ver034.pdf 29 29/11/2017 3:09:15 PM
Loading ...
Loading ...
Loading ...