Loading ...
Loading ...
Loading ...
8
BEFORE USING THE APPLIANCE FOR THE FIRST TIME
Make sure that the plastic packaging protecting the filters has been removed before using
the appliance.
Also make sure that:
• The voltage of your electrical installation corresponds to the one indicated on the appliance.
Your appliance can be used with a power plug without an earth connection. It is a class II appliance
(double electrical insulation),
• The appliance is positioned in the house as described above,
• The air inlet and outlet grids are completely unobstructed,
• Ensure the 4 filters and front panel have been correctly installed (see section « Disassembling /
Reassembling filters »).
This appliance is fitted with a device that automatically prevents it from operating if the front door
is not correctly assembled.
Inserting the filters
This appliance is equipped with 4 types of filters:
Pre-filter Active carbon
filter
NanoCaptur
filter
True HEPA Allergy
+ filter
NB: For optimum performance of the appliance, only use filters provided by ROWENTA.
To install the filters, follow the instructions in the section « Disassembling/Reassembling filters ».
Please note: certain filters may emit a temporary slight odour, due to the transport and storage conditions.
SWITCHING THE APPLIANCE ON
Connect the power cord and press the start button (8).
Your appliance will be preset to automatic mode the first time you turn it on.
Thanks to its infrared particles sensor and its gas sensor (model PU6020 full size only), it detects
the level of pollution in the room and automatically adjusts the filtration speed accordingly.
A light changes color to indicate the quality of air in the room.
Air quality Color of light
Filtration speed
(in auto mode)
Excellent Blue
Average Purple
Poor Red
Loading ...
Loading ...
Loading ...