Loading ...
Loading ...
Loading ...
4
Image Setting
• To remove the on-screen parking guidelines, cut open the white wire
loop which splits from the camera’s cable. Otherwise, keep the white
wire loop uncut.
• If the camera image appears reverse, cut open the blue wire loop
which splits from the camera’s cable. Otherwise, keep the blue wire
loop uncut.
• Make sure to unplug the power cable from the camera and plug it again
to enable the new setting (after cutting off the white or blue wire loop).
Specications
Power supply ................................... 12 VDC
Viewing angle ..................................170°
TV system ........................................NTSC
Video output ....................................1.0 vp-p, 75 Ω
S/N ratio ...........................................≤45 dB
Ingress protection rating .................. IP67 (waterproof)
Operating conditions ........................ -22 to +140°F (-30 to +60°C)
max. 95% RH
White balance ..................................Auto
Illumination ......................................min. 0.1 lux
Automatic gain control (AGC) ..........Auto
Resolution (TV lines) .......................480
Electronic shutter speed .................. 1/60 (NTSC)
Effective pixels .................................648 x 488
Dimensions (L x W x H) ................... 9.84” x 0.945” x 0.866”
250 x 24 x 22 mm
Cable length .................................... 197”/5m (video cable); 39”/1m (power
cable); 20”/0.5m (camera’s cable)
Specications are subject to change without notice.
Loading ...