Loading ...
Loading ...
Loading ...
8
OPERATION
soaked in isopropyl alcohol to clean the
socket on the front panel.
RADIO OPERATION
SWITCHING TO RADIO MODE
Press MODE button (6) to select radio
mode, the radio mode appears in the
display together with the memory band
and frequency.
SELECTING THE FREQUENCY BAND
At radio mode, press 7/BAND button
(12) shortly to select the desired band.
The reception band will change in the
following order:
→FM1→FM2→FM3→WB→AM1→AM2
SELECTING STATION
Press 9/ button (3) or 8/ button (1)
shortly to activate automatic seek
function. It will search up/down a station
automatically. Press for 2 seconds until
“MANUAL” appears on the display, the
manual tuning mode is selected. In this
mode you can turn up/down a step
frequency one by one till searched a
station. If both buttons have not been
pressed for several seconds, they will
return to seek tuning mode and “AUTO”
appears on the display.
AUTOMATIC MEMORY STORING &
PROGRAM SCANNING
- Automatic memory storing
Press AS/PS button (7) for 87.5MHz
frequency and checks the signal strength
until one cycle search is finished. And
then some stations are stored into the
corresponding preset number button. In
the first cycle it will in LOCAL mode to
receive the stronger station. If it is less
than 18 pcs station it will searching
stations in 2
nd
cycle in DX (distance)
mode.
- Program scanning
Press AS/PS button (7) shortly to scan
preset station. The radio is holding at that
preset number for several seconds with
release mute, then searches again.
MANUALLY STORING STATION AND
RECALL PRESET STATION
To receive a station, Press one of the
preset button(1~6) for 2 seconds. The
current station is stored into the number
button. Shortly press the preset button (1~6)
to directly listen the station that saved in the
corresponding preset button.
In WEATHER BAND.
1 button(20): 162.550MHz
2 button(21): 162.400MHz
3 button(22): 162.475MHz
4 button(23): 162.425MHz
5 button(24): 162.450MHz
6 button(25): 162.500MHz
The next station is 162.525 MHz.
Press / button to change these
stations.
USB PLAY OPERATION
On the front panel of the unit, there is an
USB interface (9). You can connect an USB
driver through this interface (9). When you
connect an USB driver through the
interface, the unit will search the MP3/WMA
files and start to play. If in other mode, you
can also press MODE button (6) to select
USB mode.
The operation please refer to the following
instruction.
SELECTING SONGS IN SINGLE STEP
Press button (3) or button (1) to
move to the following song or the previous
song. Song number shows on display.
Press and hold button (3) or button
(1) for 2 seconds to fast forward or fast
reverse. Song playing starts from when you
Loading ...
Loading ...
Loading ...