Loading ...
Loading ...
Loading ...
7
OPERATION
SWITCHING ON/OFF THE UNIT
Press PWR button (6) to turn on the unit.
When the unit is on. Press and hold for 2
seconds to turn off the unit.
SOUND ADJUSTMENT
Press SEL button (2) shortly to select the
desired adjustment mode. The adjustment
mode will be changed in the following
order:
→BAS-TRE-BAL-FAD-BEEP-EQ-LOUD-LOC-
STEREO-VOL
BAS: bass
TRE: treble
BAL: balance
FAD: fader
LOUD: loudness
EQ: equalization
DX: distance
ST:stereo
VOL: volume
By rotating the audio knob (2) it is possible
to adjust the desired sound quality.
Press and hold SEL for 2 seconds. You can
choose the area between USA and
EUROPE by rotating the knob (2).
EQ FUNCTION
In EQ item you can select the preset EQ
mode by rotating the audio knob (2) as
below:
FLAT---POP--- ROCK---CLASS---EQ OFF
SHOW THE TIME
Press DISP button (11) to show the time for
several seconds. After several seconds it
will return to show the information.
SET THE TIME
Press and hold DISP button (11) for 2
seconds the HH digit will flash. Press the
/ to change the hour. After that press
DISP button the “MM” will flash. Press the
/ to change the minute. Then press DISP
button to confirm.
LOUDNESS
In LOUD item, rotating the audio knob (2) to
turn it on/off.
LIQUID CRYSTAL DISPLAY
Exhibit current frequency and activated
functions on the display .
LOCAL function
Press SEL knob several times till appear
“DX”. Rotating the audio knob (2) to switch it
to local mode. In LOC mode the unit will
reduce the receiving sensitivity when you
search station. That means you can receive
the station that sound is good. It will ignores
the station that sound is not good. In DX
mode it will increase the receiving
sensitivity when you search the station.
That means you can receive more stations.
STEREO /MONO function
In STEREO item rotating the audio knob (2)
to choose STEREO or MONO mode. In
STEREO mode you can receive FM stereo
signal. In MONO mode the stereo station
will be switched to monochrome.
Sometimes when the signal is not good. If
you change it to MONO mode. The noise
will be reduced.
AUXILIARY INPUT
The unit can be connected to a portable
audio player through the AUX IN jack (10).
RESET FUNCTION
RESET button (19) must be activated with
either a ballpoint pen or thin metal object.
The RESET button is to be activated for the
following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note: if press RESET button (19), the unit
can’t work yet, please use a cotton swab
Loading ...
Loading ...
Loading ...