Technical Support and E-Warranty Certificate www.vevor.com/support
SURGE PROTECTIVE DEVICE
MODEL:LSSP-50E
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
- 1 -
MODEL:LSSP-50E
Have product questions? Need technical support? Please feel free to
contact us:
CustomerService@vevor.com
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
SURGE PROTECTIVE
DEVICE
- 2 -
INSTRUCTIONS
SPECIFICATIONS:
FEATURES INCLUDE:
•(2) color LED indicator lights
•Weather resistant
•Limited lifetime warranty
•Pull handle on plug
•It’s portable, just plug it in
Model
LSSP-50E
Rated
125/250V~
Jopule Rating
4800J
Type 3 SPD
- 3 -
INSTALL STEPS:
STEP 1: Plug Surge Protective Device into AC power. DO NOT plug in
your RV at this time. Verify GREEN surge indicator LED(s) is on.
STEP 2: Verify which LED's come on.
The Correct Wiring condition occurs when both the GREEN LED'S
are on If this does not occur you may be experiencing one of the
other seven (7) Wiring Conditions as noted in the diagrams:
Open Neutral
Open Ground
Missing L1 120V
Missing L2 120V
Reverse Polarity
L1&Gnd Reversed
L2&Gnd Reversed
Your Surge Protective Device will continue to work during any of the wiring
conditions; however, only the Correct Wiring condition (both GREEN LED's
on) is optimal and any other wiring condition should be corrected by
Campground Maintenance before use.
- 4 -
STEP 3: Plug in your RV power to the Smart Surge Protector. Refer to
STEP 2 above for surge protection wiring conditions.
LED INDICATORS:
Note:The below Green light off indicates a surge occurrence.
- 5 -
STEP 4:When the RED LED is on, the temperature is higher than
60 ℃,and other indicator functions remain unchanged
CAUTIONS:
TO REDUCE THE RISK OF ELECTRIC SHOCK, USE ONLY IN DRY
LOCATIONS.
Do not install this device if there is not least 10 meters (30 feet) or more of
wire between the electrical
outlet and the electrical service panel
This device features an internal protection that will disconnect the surge
protective component but will
maintain power to the load - now unprotected. if this situation is
undesirable for the application, follow the
manufacturer's instructions for replacing the device
ATTENTION:
Pour réduire le d'électrocution,Pour Usage à L'Intérieur Seulement.
N’installez pas cet appareil si le fil entre la prise électrique et le panneau
électrique est d’une longueur
inférieure à 10 m (30 pi).
Ce dispositif est doté d’un système de protection interne qui désactivera le
composant de suppression des
surtensions. La barre d’alimentation continuera ensuite à laisser passer le
courant, mais sans la protection
contre les surtensions.
Si les appareils branchés nécessitent une protection contre les
- 6 -
surtensions,suivez les directives du fabricant
pour le remplacement du dispositif.
Manufacturer: NINGBO LINSHENG ELECTRIC CO., LTD
Address：Xiao Dong Industrial Park, Yuyao,ZheJiang,China
Made In China
