Loading ...
Loading ...
Loading ...
CAUTION
CAUTIONCAUTION
CAUTION:
::
:
•
Do not use a wire brush or other sharp, abrasive items.
•
Do not use any acidic or abrasive
• To clean the surface of the
housing, use a mild
•
The appliance can be used again after
• If you use your ex
tractor hood in recirculation mode, you must
(see “Replacing the activated car
bon
Cleaning the alumin
Cleaning the aluminCleaning the alumin
Cleaning the aluminum grease filter
um grease filterum grease filter
um grease filter
WARNING: Risk of fire!
WARNING: Risk of fire!WARNING: Risk of fire!
WARNING: Risk of fire!
Grease
residues in the alumin
peratures. It is therefore important that the grease filter is regularly cleaned / r
placed.
Grease and vapours collect in the
filter
clean the grease filter monthly:
• Remove the aluminum grease
filter
tly and pull out towards the front.
• Rinse the grease filter in a
solution
• Then clean with a soft brush,
rinse
• Alternatively, the grease filter
can
occur in the dishwasher. This
does
Replacing the activated carbon filter
Replacing the activated carbon filterReplacing the activated carbon filter
Replacing the activated carbon filter
The activated carbon filter absorbs
odours
Order the carbon filter from your
dealer
reference number found under
“Technical
• See “Installing the activated
carbon
• Remove the old carbon filter by
turning the filter anti
Replacing the lighting
Replacing the lightingReplacing the lighting
Replacing the lighting
WARNING:
WARNING:WARNING:
WARNING:
Allow the lamps to cool before re
placing
Halogen lamps (Type E14
Halogen lamps (Type E14Halogen lamps (Type E14
Halogen lamps (Type E14
• Pull the pull-
out device and remove the aluminum grease
•
Remove the faulty bulbs and screw in new bulbs.
•
Reinstall the aluminum grease filter.
33
Do not use a wire brush or other sharp, abrasive items.
Do not use any acidic or abrasive
cleaners.
housing, use a mild
detergent and a soft cloth to pre
vent scratching.
The appliance can be used again after
everything has dried properly.
tractor hood in recirculation mode, you must
replace the acti
vated
bon
filter”).
residues in the alumin
um grease filter may ignite on exposure to high te
peratures. It is therefore important that the grease filter is regularly cleaned / r
filter
and may accumulate if not regularly
cleaned. We
filter
by sliding back the lock in the handle re
cess,
solution
of hot water and neutral detergent. Soak the
filter
rinse
thoroughly with hot water and leave to dry.
can
also be cleaned in the dishwasher (up to
60°C).
does
not affect the function of the grease filter.
odours
and must be replaced at least every six
months,
dealer
nn.de
nn.denn.de
nn.de
“Technical
Data”.
carbon
filter for recirculation mode”.
turning the filter anti
-clockwise.
placing
the lighting. Risk of burns!
Risk of burns!Risk of burns!
Risk of burns!
2 x 28
2 x 282 x 28
• Use the correct lighting:
1x1,5 W LED light
2 x 28
out device and remove the aluminum grease
filter.
Remove the faulty bulbs and screw in new bulbs.
Reinstall the aluminum grease filter.
vent scratching.
vated
carbon filter regularly
um grease filter may ignite on exposure to high te
m-
peratures. It is therefore important that the grease filter is regularly cleaned / r
e-
cleaned. We
recommend that you
cess,
push the filter down gen-
filter
in the solution.
60°C).
Slight discoloration may
months,
depending on use.
www.bo
www.bomwww.bo
www.bom
To order, use the
Loading ...
Loading ...
Loading ...