Loading ...
Loading ...
Loading ...
2). Move the camera body up and down to adjust the
tilt position [0° to 75°].
3). Rotate the camera body to adjust the rotation
position [0° to 360°].
2.1.2 Mounting with Inclined Ceiling Mount
Before you start:
You need to purchase an inclined ceiling mount first.
Steps:
1. Paste the drill template (supplied) to the place where
you want to install the camera.
2. Drill screw holes, and the cable hole on the
ceiling/wall according to the supplied drill template.
Screw Hole
Cable
Hole
Figure 2-6 The Drill Template
3. Disassemble the inclined ceiling mount by the screw
driver.
4. Install the turret camera’s mounting base on the
inclined ceiling mount cover with three PM4 screws.
Inclined
Base Cover
Figure 2-7 Install Turret Camera’s Mounting Base
5. Install the inclined ceiling mount’s body on the
ceiling/wall with four PA4 × 25 screws, as shown in
Figure 2-8.
Inclined Ceiling
Mount
Figure 2-8 Fix the Inclined Ceiling Mount Body
6. Combine inclined ceiling mount’s cover with its body
with supplied screws.
7. Repeat steps 6 to 9 of the 2.1.1 Ceiling/Wall Mounting
without Junction Box to complete the installation.
Figure 2-9 Fix the Camera to the Inclined Ceiling Mount
Loading ...
Loading ...
Loading ...