Loading ...
Loading ...
Loading ...
6 INSTALLATION OF THE APPLIANCE
Cabinet requirement
Models are designed to be built into cabinetry either
below a benchtop or into a vertical cabinet.
WARNING
• The cooker must be installed and serviced only
by an authorised person.
• A Certificate of Compliance MUST be supplied to
be kept by the customer.
• The packing materials must be removed before
you install the cooker.
• The surrounding kitchen cabinets must be able
to withstand 85°C. Electrolux WILL NOT accept
responsibility for damage caused by installation into
kitchen cabinets which cannot withstand 85°C.
• The vents, openings and air spaces MUST NOT
be blocked.
• You MUST NOT lift or pull the cooker by the
door handle.
• The cooker MUST be checked every five years.
• If the supply cord is damaged,it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
• The appliance must not be installed behind a
decorative door in order to avoid overheating.
• Due to the weight (70kg) and size of the cooker,
2 persons are required to install it.
INSTALLATION OF THE APPLIANCE
IMPORTANT
To minimise the weight of the oven for easier
installation, remove the oven door and oven
internal accessory pack.
Locking tab up at normal
position.
Press the locking tab down
for removing the door.
Gently close the door until
it comes to a stop. Then lift
the door off the hinge.
Leveling oven
Place a level in the oven as below making sure
the level sits on the front and rear forms.
Loading ...
Loading ...
Loading ...