Loading ...
Loading ...
Loading ...
No naked flame sources, such as lighted candles, should
be placed on the equipment.
The device will be charged by specified source which
the output circuit comply with LPS/PS 2.
Installation
Install the equipment according to the instructions in
this manual.
Never place the equipment in an unstable location. The
equipment may fall, causing serious personal injury or
death.
DO NOT touch the sharp edges or corners.
Transportation
Keep the device in original or similar packaging while
transporting it.
DO NOT drop the product or subject it to physical
shock.
Power Supply
Refer to the device label for the standard power supply.
Please make sure your power supply matches with your
device.
Maintenance
If the product does not work properly, please contact
your dealer or the nearest service center. We shall not
assume any responsibility for problems caused by
unauthorized repair or maintenance.
Cleaning
Please use a soft and dry cloth to clean the interior and
exterior surfaces. Do not use alkaline detergents.
Using Environment
The device contains magnets. Keep the valuables and
the precise products away from the device.
When any laser equipment is in use, make sure that the
device lens is not exposed to the laser beam, or it may
burn out.
DO NOT aim the lens at the sun or any other bright
light.
To avoid heat accumulation, good ventilation is required
for a proper operating environment.
DO NOT expose the device to extremely hot, cold, dusty,
corrosive, saline-alkali, or damp environments. For
temperature and humidity requirements, see device
specification.
DO NOT expose the device to high electromagnetic
radiation.
DO NOT touch the heat dissipation component to avoid
burns.
DO NOT install indoor product where it may get wet by
water or other liquid.
Emergency
If smoke, odor, or noise arises from the device,
immediately turn off the power, unplug the power cable,
and contact the service center.
Hearing Safety
To prevent possible hearing damage, do not listen at
high volume levels for long periods.
To achieve a better product experience, please visit
https://www.hikvision.com/sg/support/download/soft
ware/hikin/ to download the HIK IN installation
package.
Loading ...
Loading ...
Loading ...