Loading ...
Loading ...
Loading ...
96
Table 46. Description of the buttons
Parameters
Function
Introduction
Min. Time
After setting Min. time from 5s to 1800s, any objects are left
in the selected area or removed from the selected area over
the minimum time will trigger the alarm.
Sensitivity
Level 1~10 is available, the default level is 5. The higher the
sensitivity, the easier it is for moving objects to be recorded
in the results.
Note: The sensitivity can be configured to detect various
movement according to different requirements. When the
level of sensitivity is low, slight movement won’t trigger the
alarm.
Min. Size
Draw the screen or input pixel number to set the minimum
size of the detected object. When the object is smaller than
this size, it will not be detected. The default minimum size is
3*3.
Max. Size
Draw the screen or input pixel number to set the maximum
size of the detected object. When the object is larger than this
size, it will not be detected. The default maximum size is
320*240.
[Schedule Settings]
Step 3: Set detection schedule;
Note: Refer to Table 41 of 8.4.2.1 Region Entrance for details.
[Alarm Action]
Step 4: Set alarm action;
Note: Refer to Table 42 of 8.4.2.1 Region Entrance for details.
Loading ...
Loading ...
Loading ...