Loading ...
Loading ...
Loading ...
（The picture above is only for reference. The actual configuration will
depend on the physical product or statement by the distributor）
EN-9
Remove the decorative cover on the left side of the beam in the refrigerator and take out the middle
beam fixing block, screws and plastic inserts in the attachment. Then insert the plastic inserts into two
upper holes of the middle beam and the lower holes, and then fix the middle beam fixing block to two
middle holes of the middle beam with screws, When the screw is half tightened, move the fixing block to
the cabinet and tighten the screws. Finally, tighten the fixing block on the cabinet with the small screws.
The installation is completed. (This item is optional for the middle beam fixing block)
Loading ...
Loading ...
Loading ...