Loading ...
2 WB26BCI STRAIGHT SHAFT TRIMMER & BRUSH CUTTER
STARTING INSTRUCTIONS
Do not start the unit until it has been completely assembled.
Always follow these procedures when cold starting the trimmer.
QUICK START GUIDE
BASIC ASSEMBLY
For detailed assembly instruction consult the assembly section of
this operators manual.
1. FILL WITH 50:1 MIX
1. CONNECT SHAFTS
By removing plug & cap,
attaching the two shafts
and tightening the knob.
4. PULL 3-5X
Until the engine
begins to try to start.
2. MOVE CHOKE
TO START
By moving the priming lever
up to the START position.
2. ATTACH HANDLE
Using the bolts and
hex wrench provided.
5. MOVE CHOKE TO RUN
By moving the priming lever
down to the RUN position.
3. PRIME ENGINE 7X
By pressing the priming
bulb beside the gas cap.
3. ATTACH GUARD
Using the bolts and
hex wrench provided.
6. PULL UNTIL THE
ENGINE STARTS
Loading ...
Loading ...
Loading ...