Loading ...
Loading ...
Loading ...
Smart Conference Camera • User Manual
7
Chapter 2 Installation
The camera supports desk and wall mounting.
Desk Mounting
Place the camera on a smooth horizontal table, and adjust the camera base as required.
Please keep the desk stable, pay attention to anti-skid, and make sure there is no obstruction in
front of the camera.
Desk Mounting
Wall Mounting
The camera can be mounted on a designated wall with the wall mounting bracket.
The wall mounting bracket is optional. The applicable model is DS-65VTA-wall mounting bracket
assembly.
The camera is installed in the conference room. The recommended installation height is 1.2 m ~
1.6 m, at which the whole conference room can be viewed.
The accessories need to be replaced during wall mounting. The precautions are as follows.
Before replacing accessories, make sure that the worktable is clean and tidy to avoid external or
structural damage to the camera caused by dirt or sharp objects.
Before replacing accessories, please unplug all external cables of the camera. Please protect the
lens from impact or falling to prevent damage to the camera.
Please keep the replaced accessories properly to avoid loss.
Remove the camera desk-mounting base.
Loading ...
Loading ...
Loading ...