Philips HTS3410D/55

User manual - Page 29

For HTS3410D/55.

PDF File Manual, 36 pages, Read Online | Download pdf file

HTS3410D/55 photo
Loading ...
Loading ...
Loading ...
English
29
Tuner Operations
IMPORTANT!
Make sure the FM and AM antennas
are connected.
Tuning to radio stations
1 Press TUNER on the remote (or press
SOURCE control on front panel) to
select FM or AM .
2 Press and hold S / T on the
remote until the frequency indication
star ts to change, then release.
The next r adio station will tune
automatically.
3 To tune a weak station, press S / T
briefly and repeatedly until an optimal
reception is found.
Presetting radio stations
You can store up to 40 preset radio
stations in the memory, star ting from FM
and followed by AM bands.
Automatic presetting
You can store all available radio stations
automatically.
In tuner mode, press and hold PROG
until "AUTO PROG" appears.
AUTO PROG
All the available radio stations with
strong transmission signal will be stored.
Automatic preset will begin from
preset (1) and all your former presets will
be overridden.
If it reaches 40 presets, PROG FULL
appears.
Once completed, PROG END
appears.
Manual presetting
You can choose to store only your
favourite radio stations.
1 Tune to your desired radio station (see
Tuning to a radio station”).
2 Press PROG.
PROGRAM icon appear s.
3 Use the numeric keypad (0-9) to
select a preset number.
If “
PROGRAM icon goes off before you
select the desired preset number, press
PRO G again.
4 Press PROG again to store.
5 Repeat steps 1~4 to store other radio
stations.
Helpful H ints:
If you attempt to program more than 40
preset radio stations, PROG FULL
appears.
The system will exit presetting mode if no
button is pressed within five seconds.
Selecting a preset radio
station
Press 1 2 or use the numeric keypad
(0-9) to select a preset number.
The preset number, radio frequency,
and waveband will appear.
Deleting a preset radio station
Press and hold Ç until PXX CLR
appears.
The current preset radio station will
be deleted.
Changing tuning grid
In some countries, the frequency step
between adjacent channels in the AM/FM
band is 9K/50K(10/100K in some areas).
The preset frequency step in the factory
is 9K/50K.
In tuner mode, press and hold PLAY/
PA USE on the front panel for more than
5 seconds, the display will show 9/
50KHZ or 10/100KHZ .
Loading ...
Loading ...
Loading ...