Loading ...
Loading ...
Loading ...
12
3. Use these buttons on the
control panel and remote to increase or decrease
the Set Temperature or Timer.
Temperature range:
61
O
F~88
O
F(16
O
C~31
O
C)
Press the mode button to cycle
through the various modes: Cool, Dry, Fan and
Auto.
Cool Mode: The cooling function allows the air
conditioner to cool the room and at the same time
reduces Air humidify. Press the MODE button to
activate the cooling function. To optimize the
function of the air conditioner, adjust the
temperature and the speed by pressing the button
indicated.
Dry Mode: This function reduces the humidity of
the air to make the room more comfortable. Press
MODE button to set the DRY mode. An automatic
function of alternating cooling cycles and air fan
is activated.
Fan Mode: The conditioner works in only
ventilation. Press MODE button to set the FAN
mode. With pressing FAN SPEED button the
speed changes in the following sequence: Hi, Med
and Lo in FAN mode. The remote control also
stories the speed that was set in the previous
mode of operation.
Auto Mode
: In AUTO mode the unit automatically
chooses the fan speed and the mode of operation.
In this mode the fan speed and the temperature
are set automatically according to the room
temperature (tested by the temperature sensor
which is incorporated in the indoor unit.).
1. Without timer setting,the
operation mode is Cooling,Dry, Fan and Auto,and
the set temperature will be displayed.
Time will be displayed under time
r setting.
Digital Display:
2.
Mode Button:
1
2 64 75 3
9 8
and Button:
Press the SLEEP button, all of the
display lights will turn off after a while, but the
Sleep light is always on. In SLEEP mode, the air-
conditioner will automatically adjust the temperature
to make the room more comfortable durning the
night.
4. Sleep Button:
Control Panel
Loading ...
Loading ...
Loading ...