Loading ...
Loading ...
Loading ...
7 – ENGLISH
8. ALARM THUMBWHEEL: Rotate the aluminum Thumbwheel counterclockwise until
the Alarm hand points to the designated time you wish to wake to. Do NOT turn the
Thumbwheel clockwise or you may damage the mechanism.
9.
SNOOZE (TOP OF CABINET): When the Alarm sounds, press, hold, and then release
the Snooze button to silence the Alarm for approximately 5 minutes. After 5 minutes,
the alarm will automatically resume. The Snooze time is not adjustable.
10.
CLOCK: This quartz analog clock features a fine mechanical quartz movement for superb
accuracy. The clock operates off of a single “AA” battery so power failures will not
affect the clock’s accuracy. Check the battery annually so the clock remains accurate.
The clock’s illumination cannot be turned off or adjusted. It is normal for the light to
take several seconds to extinguish if the power supply is disconnected.
Important Note: Due to the nature of the alarm thumbwheel’s analog mechanism,
which was designed for simplicity, there can be up to a ve-minute deviation from
when the alarm activates. For example, if the alarm is set for 10:00, it is possible it
could activate at 9:55 or 10:05. We recommend you set the alarm early the rst time
you use it to accommodate for this. As you use your Model Three BT you will get
a better idea of where you need to set the alarm in order to wake-up at the desired
time.
Guide To Features (Rear Panel)
1. USB: Connect a standard USB cable to the USB port . Connect the cable to your USB charging
compatible device, such as a phone, to begin charging that device.
2. 12VDC: Connect the included AC power supply to this input or use an optional DC power
supply. Do not connect the power supply to an electrical outlet controlled by a switch because
if the switch is turned off by mistake, the alarm will not wake to the radio when set. Use only
the power supply provided with this product. Should the power supply get damaged or
misplaced, use only a like replacement. The connector is 5.5 mm/2.1 mm center positive.
3. FM ANTENNA SWITCH: Switch between internal and external FM antennas. This switch has no
affect on AM reception. In some cases, FM reception may be improved by setting this antenna
switch to External.
37 41
2 5 106
119 8
12
Loading ...
Loading ...
Loading ...