Loading ...
Loading ...
Loading ...
handle when the motor is
started.
•
Put the product on a stable,
flat surface and start it. Make
sure that the blade does
not hit the ground or other
objects.
•
Always stay behind the
product when you operate it.
•
Let all the wheels stay on
the ground and keep 2 hands
on the handle when you
operate the product. Keep
your hands and feet away
from the rotating blades.
•
Do not tilt the product when
the motor is started.
•
Be careful when you pull the
product rearward.
•
Never lift up the product when
the motor is started. If you
must lift the product, first stop
the motor, turn the safety
key to 0 and remove the
battery (model LC141iV and
LC141i) or disconnect the
power cord (model LC141C).
•
Do not walk rearward when
you operate the product.
•
Stop the motor when you
move across areas without
grass, for example paths
made of gravel, stone and
asphalt.
•
Do not run with the product
when the motor is started.
Always walk when you
operate the product.
•
Stop the motor before you
change the cutting height.
Never make adjustments with
the motor started.
•
Never let the product stay
out of view with the motor
started. Stop the motor and
make sure that the cutting
equipment does not rotate.
Safety instructions for operation
Personal protective equipment
WARNING: Read the
warning instructions that
follow before you use the
product.
•
Personal protective equipment
cannot fully prevent injury but
it decreases the degree of
injury if an accident does
occur. Let your dealer help
you select the right equipment.
•
Use heavy-duty slip-resistant
boots or shoes. Do not use
open shoes or go with bare
feet.
•
Use heavy, long pants.
•
Use protective gloves when
necessary, for example when
you attach, examine or clean
the cutting equipment.
919 - 011 - 16.08.2023
15
Loading ...
Loading ...
Loading ...