Loading ...
Loading ...
Loading ...
7
OPERATING INSTRUCTIONS
*In all Error Code instances, if Pressing the cancel button or turning power o at the
breaker for 5 min. does not resolve the problem, contact the Frigidaire Customer Care
Center at 1-800-944-9044.
Error Code
Displayed
Error Code*
Problem Solution
i10 A low fill has been
detected.
Look for a pinched water supply line, or
water shuto is not completely opened.
i20; i40; iF0 Clogged filters or a
restricted drain line
has been detected.
Check and clean both filters and sump
area and check for a pinched or blocked
drain hose. If the drain line is attached to a
disposer, check that the knockout plug has
been removed.
i30 A leak or overflow
of water has been
detected in the
bottom pan.
Look for loose connections at the water inlet
valve and ensure the unit is properly leveled.
i50 A problem has been
detected with the
drain or wash motor.
Pressing the cancel button or turning power
o at the breaker for 5 min. should clear this
error code and the unit can be restarted.
If this does not resolve the problem,
service will need to be called.
i60 A problem has been
detected with the
water heating system.
iC0 A problem has been
detected with the
electronic control system.
Status Window
The STATUS window, available on some models, indicates the following activity:
User Instruction Code
1-24h Number of delay start
hours. The last hour will
count down in minutes.
CLOSE Close will scroll across the status
window indicating the door
needs to be closed.
MINUTES Number of minutes left in
cycle (1-199).
L0–L6. Level of Rinse Aid dosage.
Instruction
Code
Displayed
Problem/Condition Solution
Close This indicates the
door has been left
open or not properly
latched.
Ensuring the door is properly latched will clear
the display. This does not indicate a problem
with your dishwasher and service will not need
to be contacted.
PF Soft Power Failure: PF is displayed if a power outage occurs during
a wash cycle. The wash cycle will be paused temporarily and resume
once power is restored if the door has not been opened.
Hard Power Failure: A hard power failure means the unit will not
operate until power is restored. Pressing start within 18 hours of loss of
power will resume power at the point of cycle interruption.
Loading ...
Loading ...
Loading ...