Loading ...
Loading ...
Loading ...
12
OPERATING INSTRUCTIONS
CAUTION
The use of industrial grade detergent
can damage parts of the dishwasher
leading to damage to the unit and
surrounding property. Use only
household grade automatic dishwasher
detergents.
How much Detergent to use
The amount of detergent to use depends
on the water hardness. Water hardness is
measured in grains per gallon. Using too
little detergent can result in poor cleaning
and hard water filming or spotting. Using
too much detergent in soft water can
cause etching to some glassware which
is surface damage that appears like a film
but cannot be wiped o. Your local water
company, water softener company or
county extension agent can tell you the
water hardness in your area.
Main Wash Cup
Main Wash
Cover
Cover
Latch
NOTE
Hard water may cause lime deposit
buildup on the interior of the dish-
washer. For cleaning instructions see
“Removing Spots and film” section.
NOTE
Detergent tablets and All-In-One packs
may not dissolve completely if used with
the QUICK WASH cycles. If one of these
products are used, place the tab or pack
directly on the bottom of the tub in a
corner before starting the dishwasher,
rather than placing these products in the
dispenser.
Filling the Detergent Dispenser
The detergent dispenser has a main wash
cup where you will add your detergent or
detergent tab.
• Use only fresh automatic
dishwashing detergent. Other
detergents may cause oversudsing.
• When using automatic dishwashing
detergent tablet, place one tablet in
main wash cup and close.
• Add detergent just before starting
cycle.
• Store detergent in a cool, dry
location. Moist or caked detergent
may not dissolve properly.
To add detergent:
1. Press the dispenser cover latch to
open the main wash detergent cup.
2. Add the recommended amount of
detergent to the main wash cup.
3. Slide the main wash cover back over
the main wash cup to close.
Loading ...
Loading ...
Loading ...