Loading ...
Loading ...
Loading ...
17
18. Move Dishwasher into final position
19. Place foam insulation pad below the
dishwasher (on some models)
After pushing the dishwasher in the cabinet opening, adjust
the leveling feet to standard height of 33
7
/
8
" (860 mm) and
up. Then take the floor insulation pad and slide it from the
front (gap between the floor & the drip tray).
The floor pad is designed to go around the leveling legs.
20. Pull slack from utilities
NOTE: Pull slack out of utilities at the same time the
dishwasher is pushed into the cabinet opening to avoid any
kinks.
Custom Panel Installation (on some
models)
Custom Panel Dimension
Make sure that the custom panel is as per the recommended
dimensions. See below image for the recommended dimensions.
A
B
C
A. 23
9
/
16
" (598 mm)
B. 28
3
/
8
"-30" (720-762 mm)
C. 5/8"-1" (16-25 mm)
A customer supplied door panel must weigh no more than 16 lbs
(7.3 kg) with the handle (together). And must be made to specific
dimensions as given above. It is recommended that a cabinet
maker cut the custom panel because of the precise dimensions
needed.
NOTE: The handle for the custom panel is not included.
Custom Panel Installation steps
1. In an area that is flat and clear of debris, place down a blanket
as a work surface.
2. Attach the custom panel handle as you would any other
cabinet handle. Be sure to protect the finished surface with
painters tape when preparing and recessing the rear panel to
conceal attachment hardware.
3. Install the custom hardware handle(s) on the front of the
custom panel, inside dotted line as shown below
A
A. 6" (152.4 mm)
IMPORTANT: If the handle is attached from the back of the
custom panel, the screw holes should be countersunk for the
screw heads to be flush with the panel. If the handle is
attached to the front of the custom panel, the screw lengths
cannot exceed the panel thickness.
26-Jun-2023 08:47:55 EDT | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
Loading ...
Loading ...
Loading ...