Loading ...
Loading ...
Loading ...
3. TURN ON the heater by remote control, or off the heater
4. DOWN & UP BUTTON, setting the power level
OPERATION BY REMOTE CONTROLLER:
The heater is operated from the remote control supplied.
Insert 2 x AAA Alkaline batteries
into the remote control.
1. POWER BUTTON: Turns heater on or off.
2.
UP BUTTON: Increases the temperature and timer level.
3.
DOWN BUTTON: Decreases temperature and timer level.
4.
LEVEL BUTTON: Use to adjust heat levels (LO-HI). Press the
Level button then use the
up and down buttons (2 and 3) to
increase or decrease the heating level.
5.
TIMER BUTTON: Use to set the timer from 0H– 24H(0-24
hours). Adjust using buttons 2
& 3 to the number of hours
you would like to set.
All SENGOKU remote controls have the same frequency, so it is possible to control
several heaters with just one remote.
Troubleshooting
1.
If heater will not power cord is plugged into an electrical outlet, if not, plug in.
2.
Check if electricity to the main fuse is working
3.
Check to see it the thermostat knob to the ON position
4.
Check the thermostat setting, The heater may be off because it has reached the desired
temperature setting
Remote Control Function
Button
Function (Heater On) Function (Heater
Off)
LED Display on
Heater
1
Turns heater on or off
2
Increase Heat Level or
Timer hours
Turns heater on to
Level
1
(minimum)
LO 50%
3
Decrease Heat Level or
Timer Hours
Turns heater on to
Level
2
(Maximum)
HI 100%
4
Enable Heat Level
adjustment
L [n]
5
Enable Timer adjustment
0
-
24
[
0H
]
-
[
24H
]
Loading ...