Loading ...
Loading ...
Loading ...
Grounding instructions
：
CAUTION:
This heater is for use on 120 volts. The cord has a plug as shown in D in
Figure 60.1. No adapter is available for this blade configuration, and none
should be used. The type outlet is a 120 volt grounding outlet. When
properly installed, it provides a ground connection through the cord to the
heater to protect the operator from electric shock.
Attention:Digital display position should be on left for correct installation direction
OPERATING INSTRUCTION
a) The heater must be properly installed before it is used.
b) The heater can be using at indoor or well protected outdoor area,
c) User-operated devices intended to reduce the risk of fire, electric shock, or injury to
persons; must be follow instruction
d) Do not change the heater structure without registered electrician advice
a) Instructions and cautionary statements for cleaning, user-maintenance, operations
recommended by the manufacturer, such as lubrication or non-lubrication, and a warning to
the
user that any other servicing should be performed by an authorized service representative.
1. PLUG the unit into a plug socket, make sure the power supply is the same as rated
2. PRESS the power button on the right side of heater
Loading ...
Loading ...