1. Home
  2. Hikvision
  3. Hikvision DS-KD8103-E6 User Manual
  4. Page 58

Hikvision DS-KD8103-E6 3.5inch Video Intercom IP Door Station

Hikvision DS-KD8103-E6 User Manual - Page 58

For DS-KD8103-E6.

PDF File Manual, 80 pages, Read Online | Download pdf file

DS-KD8103-E6 photo
Loading ...
Loading ...
Loading ...
Nofy Surveillance Center
Send an excepon or alarm signal to the remote management soware
when an event occurs.
7.
Click Save to enable the sengs.
Set Video Tampering Alarm
When the congured area is covered and cannot be monitored normally, the alarm
is triggered and the device takes certain alarm response acons.
Steps
1.
Click Event → Basic Event → Video Tampering to enter the
sengs page.
2.
Check Enable Video Tampering.
3.
Draw area.
1) Click Area Sengs.
2)
Click , and drag the mouse in the live view page to draw an area.
3)
Oponal: Click to clear the drawing area.
4.
Drag the block to set the Sensivity. The higher the value is, the easier to detect
the area covering.
5.
Oponal: Click Linkage Method, and check the normal linkage or nofy
surveillance center according to your actual needs.
Normal Linkage
Set the normal alarm linkage.
Nofy Surveillance Center
The alarm informaon is uploaded to the surveillance center when an alarm
event is detected.
6.
Oponal: Click or to perform the record or capture operaon.
7.
Click Save to save the sengs.
Event Linkage
Steps
1.
Click Event → Basic Event → Event Linkage to enter the
sengs page.
Video Intercom D Series Door
Staon User Manual
45
Loading ...
Loading ...
Loading ...