Loading ...
Loading ...
Loading ...
Figure 2-3 Install the Mounting Base to Wooden Ceiling
2). Drill holes for installing expansion bolts at first,
then install the mounting base to cement ceiling
with two PA4 × 25 screws.
Figure 2-4 Install the Mounting Base to Cement Ceiling
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
6. Align the screw hole on the main body to the notch,
and press it.
Notch
Figure 2-5 Align the screw hole to the Notch
7. Connect the corresponding cables.
8. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
Pan Position
[0° to 360° ]
Tilt Position
[0° to 80° ]
Rotation Position
[0° to 360° ]
Figure 2-6 3-Axis Adjustment
9. Secure the camera with a screw to finish the
installation.
Loading ...
Loading ...
Loading ...