Loading ...
Loading ...
Loading ...
2 Installation
Before you start:
Make sure that the device in the package is in good
condition and all the assembly parts are included.
Make sure that all the related equipment is power-off
during the installation.
Check the specification of the products for the
installation environment.
Check whether the power supply is matched with
your power output to avoid the damage.
Make sure the wall is strong enough to withstand
three times the weight of the camera and the
bracket.
If the wall is cement, insert expansion bolts before
installing the camera. If the wall is wooden, use
self-tapping screws to secure the camera.
If the product does not function properly, contact
your dealer or the nearest service center. DO NOT
disassemble the camera for repair or maintenance by
yourself.
2.1 Installation of the Camera
Steps:
1. Paste the drill template to the place where you want
to install the camera.
2. Drill the screw holes and the cable hole (optional)
on the ceiling according to the drill template.
Figure 2-1 Drill Template
3. Loosen screws.
4. Disassemble the camera by rotating the camera to
align the notch to the triangle mark to remove the
main body.
Triangle Mark
Figure 2-2 Disassemble the Camera
5. Paste the drill template to ceiling, then you have
two ways to install the mounting base according to
different types of ceiling.
1). Install the mounting base to wooden ceiling
with two PA4 × 25 screws.
Loading ...
Loading ...
Loading ...