BIM26H32IFLHD User Manual

Loading ...

Filter Installation Instructions

[BIM26H32/BIM26H34/BIM27OSADA/BIM271OS ONLY]

Tools needed: Phillips screwdriver

Connecting the filter to the potable water supply

Remove the blue clip to remove the filter’s plug, then connect the filter to potable water supply by inserting the

water supply tube to the inlet end of the filter. Reinsert the clip to lock the tube.

Purge

It is important you let the water run for 5 minutes to purge the system and to allow you to check for any leaks.

Ice Maker Connection

Cut the water hose to an appropriate length (we recommend at least 21”). Remove the blue clips and insert

the ice maker’s water supply hose onto the outlet end of the filter. Reinsert the clip to lock the tube in place

and then run the water to check for leaks.

Fixing the filter

Using a screwdriver, install the filter clip onto the back of the unit, affix the filter clip onto the back of the unit,

and affix the filter to the clip then, install the water line clip on the lower back of the unit to affix the water

tube.

NOTE: The water filter must be replaced every 6-12 months depending on the water quality.

Loading ...

Summit BIM26H32IFLHD 15" Wide 25 lb. Drain-Free Icemaker, ADA Compliant (Panel Not Included)