Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/909591-dsrm-2600bt/bg18.png)
OPERATION DSRM-2600/U
24 X7508163901
© 3/22 ECHO Incorporated
Blade use demands specific brushcutter configuration.
Operation without specified shield, barrier bar or U-handle, and
harness can result in serious personal injury. Follow installation
instructions.
*ANSI standards require brushcutters be equipped with a barrier bar or
restrictive harness. U-handle ensures a higher safety factor.
Do Not install blades on GT (Curved Shaft) model trimmers.
• Use only ECHO approved parts. Failure to use the correct parts can
cause the blade to fly off. Serious injury to the operator and/or bystanders
can occur.
• Arbor diameter of upper blade plate must match arbor diameter of blades.
• For barrier bar or U-handle, follow instructions supplied with either blade
conversion kit or U-handle kit, and verify blade is secured properly.
Pro Maxi-Cut
Grass / Weed
Blade
Tri-Cut Grass /
Weed Blade
Metal Grass /
Weed Blade
Metal Brush /
Clearing
Blades
Support
Handle, with or
without barrier
bar
U-handle or support handle with
barrier bar
U-handle*
Shield with cut-
off knife
Shield without cut-off knife
Harness Harness
Upper plate/flat
washer
Upper / Lower blade plates
Hex nut Hex nut
New cotter pin New cotter pin
Loading ...
Loading ...
Loading ...