Loading ...
Loading ...
Loading ...
ASSEMBLY DSRM-2600/U
18 X7508163901
© 3/22 ECHO Incorporated
2. Loosen upper two (2) U-handle
clamp screws (D) and position
U-handle assembly for
comfortable operation.
3. Tighten U-handle clamp
screws.
Shield Installation
(Nylon line operation)
Parts required: Shield with cutoff knife, Shield Plate, three screws, line head
plate.
Shield with cutoff knife is for use with the Nylon Line Head only.
Install shield without cutoff knife when using plastic or metal
blades, or serious injury may result.
1. Remove blade, blade
mounting hardware, and shield
without cutoff knife and retain
for future use with blade
conversions.
2. Align holes in shield (H) shield
plate (I) and bottom of the gear
case flange. Install three (3)
screws.
3. Place line head plate (A) on
PTO shaft (F).
Nylon Line Head Installation
Parts Required: Nylon Line Head.
A
B
D
C
D
D
I
F
A
H
Loading ...
Loading ...
Loading ...