FLUKE 393FC User Manual for the Fluke 393FC True-rms Clamp Meter with iFlex, CAT III 1500 V, 1500 V DC/1000 V AC/ 999.9 A DC or AC

Loading ...

CAT III 1500V TRMS Clamp Meter

Basic Measurements

Amps DC

To measure dc current:

1. Turn control knob to }.

2. Push to compensate (zero) for outside influences.

3. Position the Clamp jaw around the conductor.

The display shows the value and C to indicate that the measurement is from the jaw. When

the current measurement is <0.5 A, the center dot in the icon flashes. For current

measurements >0.5 A, the center dot in the icon is steady.

Power DC

To measure dc power:

1. Turn control knob to

2. Push to compensate (zero) for outside influences.

3. Turn control knob to

4. Position the Clamp jaw around the conductor.

5. Connect the black test lead to the COM terminal and the red test lead to the VX terminal.

6. Touch the probes to the test points of the circuit.

The display shows the measurement of dc power and dc current.

The display also shows C to indicate that the measurement is from the jaw.

Note

Push to toggle the readout between dc power and dc voltage.

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE 393FC True-rms Clamp Meter with iFlex, CAT III 1500 V, 1500 V DC/1000 V AC999.9 A DC or AC