1. INTRODUCTION
Extra thick nitrile for heavy-duty protection, ideal for automotive and industrial applications. Ideal for people with latex protein allergies.
Chemical resistant. Powder-free for those with relevant dermatological conditions. Ambidextrous, conveniently ts either hand. 100 pcs
per box. Certied to EN ISO 374-1:2016+A1:2018; EN ISO 374-5:2016; EN ISO 21420:2020.
2. SAFETY
8 DO NOT reuse or wash single-use or exam gloves.
8 DO NOT use damaged or visibly soiled or damaged gloves.
8 DO NOT touch your face while wearing gloves.
9 Wash hands with soap and water for at least 20 seconds and dry thoroughly before putting gloves on and after taking them o.
9 Wear properly tting gloves with a close t around ngers and wrist to reduce risk of exposure.
9 The glove contains natural rubber which may cause allergic reactions
9 This information does not reect the actual duration of protection in the workplace and the dierentiation between mixtures and pure chemicals.
9 The chemical resistance has been assessed under laboratory conditions from samples taken from the palm only (except in cases
where the glove is equal to or over 400 mm - where the cu is tested also) and relates only to the chemical tested. It can be dierent if
the chemical is used in a mixture.
9 It is recommended to check that the gloves are suitable for the intended use because the conditions at the workplace may dier from
the type test depending on temperature, abrasion and degradation.
9 When used, protective gloves may provide less resistance to the dangerous chemical due to changes in physical properties.
Movements, snagging, rubbing, degradation caused by the chemical contact etc. may reduce the actual use time signicantly. For
corrosive chemicals, degradation can be the most important factor to consider in selection of chemical resistant gloves.
9 Before usage, inspect the gloves for any defect or imperfections.
9 The gloves are oering protection against micro-organisms and comply to the test requirements.
9 The penetration resistance has been assessed under laboratory conditions and related only to the test specimen.
3. SPECIFICATION
SSP60L / SSP60XL
Conforms to specications EN ISO 374-1:2016+A1:2018; EN ISO 374-5:2016; EN ISO 21420:2020.
Notied Body: No.2777
Certicate number: 2777/18245-01/E00-00
Carried out by SATRA
4. APPLICATIONS
4.1. Protective gloves for use against dangerous chemicals, micro-organisms, bacteria, fungi and viruses.
5. MAINTENANCE
5.1. Store in a bag or case out of direct sunlight, away from chemicals and abrasive substances, in a clean dust free environment.
5.2. Use original box/bag for storage and transportation.
6. OBSOLESCENCE
6.1. Like all protective products, the product life and level of service depend on the type of use, care and maintenance applied.
6.2. Store in original packaging, out of direct sunlight, away from chemicals and abrasive substances and under ordinary temperature and
humidity conditions.
POWDER-FREE DISPOSABLE NITRILE
GLOVES, 5G
MODEL NO: SSP60L, SSP60XL
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
Original Language Version
© Jack Sealey Limited
SSP60L, SSP60XL Issue 1 05/02/24
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS &
CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO
MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR
FUTURE USE.
EU | Sealey EU Ltd, Farney Street, Carrickmacross, Co. Monaghan, A81 PK68 Ireland
UK | Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 sales@sealey.co.uk www.sealey.co.uk
This document has been drawn up according to Regulation (EU) 2016/425 as amended to apply to GB for Personal Protective
Equipment. The declaration of conformity can be accessed at www.sealey.co.uk.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
our technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When
the product becomes completely unserviceable and requires disposal, drain any uids (if applicable) into approved
containers and dispose of the product and uids according to local regulations.
REGISTER YOUR
PURCHASE HERE
Original Language Version
© Jack Sealey Limited
SSP60L, SSP60XL Issue 1 05/02/24
