Hikvision DS-K2M061 Secure Door Control Module User Manual

DS-K2M061 Secure Door Control Unit

User Manual

Legal Informaon

About this Manual

The Manual includes instrucons for using and managing the Product. Pictures, charts, images and

all other informaon hereinaer are for descripon and explanaon only. The informaon

contained in the Manual is subject to change, without noce, due to rmware updates or other

reasons. Please nd the latest version of this Manual at the Hikvision website ( hps://

www.hikvision.com/ ).

Please use this Manual with the guidance and assistance of professionals trained in

supporng the

Product.

Trademarks

and other Hikvision's trademarks and logos are the properes of

Hikvision in various jurisdicons.

Other trademarks and logos menoned are the properes of their respecve owners.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT

DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND "WITH

ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR

PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION

BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,

INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS

INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,

WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,

OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY

RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,

PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS

INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY

TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE

SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.

ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT

INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF

PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.

YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE

DS-K2M061 Secure Door Control Unit User Manual

DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR

PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED

TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN

RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER

PREVAILS.

Data Protecon

During the use of device, personal data will be collected, stored and processed. To protect data,

the development of Hikvision devices incorporates privacy by design principles. For example, for

device with facial recognion features, biometrics data is stored in your device with encrypon

method; for ngerprint device, only ngerprint template will be saved, which is impossible to

reconstruct a ngerprint image.

As data controller, you are advised to collect, store, process and transfer data in accordance with

the applicable data

protecon laws and regulaons, including without limitaon, conducng

security controls to safeguard personal data, such as, implemenng reasonable administrave and

physical security controls, conduct periodic reviews and assessments of the

eecveness of your

security controls.

DS-K2M061 Secure Door Control Unit User Manual

Regulatory Informaon

FCC Informaon

Please take aenon that changes or modicaon not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

FCC compliance: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable

protecon against harmful interference in a residenal installaon. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in accordance

with the

instrucons, may cause harmful interference to radio communicaons. However, there is

no guarantee that interference will not occur in a parcular installaon. If this equipment does

cause harmful interference to radio or television

recepon, which can be determined by turning

the equipment o and on, the user is encouraged to try to correct the interference by one or more

of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the

separaon between the equipment and receiver.

—Connect the equipment into an outlet on a circuit

dierent from that to which the receiver is

connected.

—Consult the dealer or an experienced radio/TV technician for help

This equipment should be installed and operated with a minimum distance 20cm between the

radiator and your body.

FCC

Condions

This device complies with part 15 of the FCC Rules. Operaon is subject to the following two

condions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause

undesired

operaon.

DS-K2M061 Secure Door Control Unit User Manual

iii

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked with "CE"

and comply therefore with the applicable harmonized European standards listed

under the EMC Direcve 2014/30/EU, the RoHS Direcve 2011/65/EU

2012/19/EU (WEEE direcve): Products marked with this symbol cannot be disposed

of as unsorted municipal waste in the European Union. For proper recycling, return

this product to your local supplier upon the purchase of equivalent new equipment,

or dispose of it at designated

collecon points. For more informaon see:

www.recyclethis.info

2006/66/EC (baery direcve): This product contains a baery that cannot be

disposed of as unsorted municipal waste in the European Union. See the product

documentaon for specic baery informaon. The baery is marked with this

symbol, which may include

leering to indicate cadmium (Cd), lead (Pb), or mercury

(Hg). For proper recycling, return the

baery to your supplier or to a designated

collecon point. For more informaon see:www.recyclethis.info

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.

This device complies with Industry Canada licence-exempt RSS standard(s).

Operaon is subject to

the following two condions:

1. this device may not cause interference, and

2. this device must accept any interference, including interference that may cause undesired

operaon of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils

radioexempts de licence.

L'exploitaon est autorisée aux deux condions suivantes :

1. l'appareil ne doit pas produire de brouillage, et

l'ulisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage

est

suscepble d'en compromere le fonconnement.

Under Industry Canada regulaons, this radio transmier may only operate using an antenna of a

type and maximum (or lesser) gain approved for the

transmier by Industry Canada. To reduce

potenal radio interference to other users, the antenna type and its gain should be so chosen that

the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful

communicaon.

Conformément à la réglementaon d'Industrie Canada, le présent émeeur radio peut fonconner

avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émeeur par

Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intenon des

autres

ulisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope

DS-K2M061 Secure Door Control Unit User Manual

rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une

communicaon sasfaisante.

This equipment should be installed and operated with a minimum distance 20cm between the

radiator and your body.

Cet équipement doit être installé et ulisé à une distance minimale de 20 cm entre le radiateur et

votre corps.

DS-K2M061 Secure Door Control Unit User Manual

Safety Instrucon

Dangers

●

The socket-outlet shall be installed near the equipment and shall be easily accessible.

●

An all-pole mains switch shall be incorporated in the electrical installaon of the building.

●

Do not connect several devices to one power adapter as adapter overload may cause over-heat

re hazard.

●

If smoke, odors or noise rise from the device, turn

o the power at once and unplug the power

cable, and then please contact the service center.

●

Shock hazard! Disconnect all power sources before maintenance.

●

If the product does not work properly, please contact your dealer or the nearest service center.

Never aempt to disassemble the device yourself. (We shall not assume any responsibility for

problems caused by unauthorized repair or maintenance.)

Cauons

●

The equipment has been designed, when required, modied for connecon to an IT power

distribuon system.

●

This equipment is suitable for

mounng on concrete or other non-combusble surface only.

●

The serial port of the equipment is used for debugging only.

● ○

Install the equipment according to the

instrucons in this manual.

○

To prevent injury, this equipment must be securely aached to the oor/wall in accordance

with the

installaon instrucons.

●

No naked ame sources, such as lighted candles, should be placed on the equipment.

●

Do not place the device in extremely hot (refer to the specicaon of the device for the detailed

operang temperature), cold, dusty or damp locaons, and do not expose it to high

electromagnec radiaon.

●

The device cover for indoor use shall be kept from rain and moisture.

●

Exposing the equipment to direct sun light, low venlaon or heat source such as heater or

radiator is forbidden (ignorance can cause

re danger).

●

Please use a so and dry cloth when clean inside and outside surfaces of the device cover, do

not use alkaline detergents.

●

Please keep all wrappers

aer unpack them for future use. In case of any failure occurred, you

need to return the device to the factory with the original wrapper. Transportaon without the

original wrapper may result in damage on the device and lead to

addional costs.

DS-K2M061 Secure Door Control Unit User Manual

Available Models

Product Name Product Model

Secure Door Control Unit DS-K2M061

DS-K2M061 Secure Door Control Unit User Manual

vii

Contents

Chapter 1 Overview .................................................................................................................... 1

1.1 Product Introducon .............................................................................................................. 1

1.2 Appearance Introducon ....................................................................................................... 2

Chapter 2 Interface Descripon .................................................................................................. 4

2.1 Cable Interface Descripon .................................................................................................... 4

2.2 Wiegand Interface Descripon .............................................................................................. 6

Chapter 3 Wiring Descripon ...................................................................................................... 7

Chapter 4 Installaon ................................................................................................................. 8

4.1 DIP Switch

Descripon ........................................................................................................... 8

4.2 Install Secure Door Control Unit ............................................................................................ 9

Appendix A. Dimension ............................................................................................................ 11

Appendix B.

Communicaon Matrix and Device Command ...................................................... 12

DS-K2M061 Secure Door Control Unit User Manual

viii

Chapter 1 Overview

1.1 Product Introducon

Figure 1-1 Appearance

Secure door control unit (hereinaer referred as "unit"), is to keep the door in the status before

the access control terminal is crashed when the access control terminal is crashed or damaged by

external force.

Secure door control unit is the middle layer between access control terminal and door lock in the

access control system. The top side can be connected to access control terminal, and the

boom

side can be connected to door contact, door magnec, exit buon, Wiegand card readers and

other external devices. Equipped with access control equipment, it is safer to control the door.

DS-K2M061 Secure Door Control Unit User Manual

1.2 Appearance Introducon

Figure 1-2 Appearance Descripon

Table 1-1 Appearance

Descripon

No. Descripon

1 LED indicator. The LED indicator only includes the power

indicator (POWER). When the indicator light is solid red, it

indicates the device is powered on.

2 Cable Interface

3 Debugging Port

DS-K2M061 Secure Door Control Unit User Manual

No. Descripon

Note

The debugging port is for debugging use only.

4 Tamper

5 Wiegand Interface

6 DIP Switch

DS-K2M061 Secure Door Control Unit User Manual

Chapter 2 Interface Descripon

Connect access control devices, secure door control unit, door locks, and other related output

devices ( you can choose connect Wiegand card reader) to establish

communicaon.

2.1 Cable Interface Descripon

Figure 2-1 Cable Interface Descripon

Table 2-1 Cable Interface

Descripon

Group No. Cable No. Color Name Descripon

Group A A1 Red +12 V Power Input

A2 Black GND

Group B B1 Yellow RS-485+ RS-485

B2 Blue RS-485-

Group C C1 Red/Green FIRE+ FIRE

DS-K2M061 Secure Door Control Unit User Manual

Group No. Cable No. Color Name Descripon

Note

●

The FIRE+ and

FIRE- are in

short circuit

status by

default. The

re signal is

invalid and the

door is locked.

●

When the FIRE

+ and FIRE- are

in open circuit

status, the

re

signal is valid

and the door is

unlocked.

Red/Green FIRE-

Group D D1 Yellow/Blue ALM_IN1 Alarm Input

D2 Black GND

D3 Yellow/Orange ALM_IN2

D4 Black GND

D5 Yellow/Purple ALM_NC Alarm Output

D6 Yellow/Brown ALM_COM

D7 Yellow/Red ALM_NO

D8 Yellow/Green DOOR_SENSOR Door Magnec

Input

D9 Black GND

D10 Yellow/Grey DOOR_BUTTON Exit Buon

D11 Black GND

D12 White/Purple DOOR_NC Door Lock Output

D13 White/Yellow DOOR_COM

D14 White/Red DOOR_NO

DS-K2M061 Secure Door Control Unit User Manual

2.2 Wiegand Interface Descripon

Figure 2-2 Wiegand Interface Descripon

Table 2-2 Wiegand Interface Descripon

Group Cable No. Color Name Descripon

Group E E1 Brown OK Access Wiegand

Card Reader

E2 Purple BZ

E3 Orange ERR

E4 Green W0

E5 White W1

E6 Black GND

DS-K2M061 Secure Door Control Unit User Manual

Chapter 3 Wiring Descripon

The wiring of external devices is as following.

Figure 3-1 External Devices Wiring Descripon

DS-K2M061 Secure Door Control Unit User Manual

Chapter 4 Installaon

Before installing the secure door control unit, please set the DIP switch and connect it with the

cable.

4.1 DIP Switch Descripon

Refer to Appearance Introducon for the posion of DIP switch. DIP switch descripon is as shown

in the following gure. No. 1 to 4 in the gure are switch No.

Figure 4-1 DIP Switch Descripon

DIP switch meaning is as shown in the following table.

Table 4-1 DIP Switch Meaning

Icon Meaning

Represent 0 in binary mode

Represent 1 in binary mode

As shown in the gure below, the binary number represented by the DIP switch 1234 is 0011,

which is the decimal address: 3.

DS-K2M061 Secure Door Control Unit User Manual

Figure 4-2 DIP Switch（Binary 0011）

Note

●

The DIP switch No. 1 to 3 are suitable for seng the RS-485 communicaon address. No. 4 is for

Wiegand mode (OFF: Wiegand input, ON: Wiegand output).

●

The DIP address cannot be repeated.

4.2 Install Secure Door Control Unit

Steps

Set the DIP of the secure door control unit according to the actual access control device

requirements.

Note

The DIP binary ranges from 0001 to 1111.

Drill holes on the wall or other places according to the mounng template.

Note

The minimum bearing weight of the wall or other places should be three mes heavier than the

device weight.

Insert the provided plasc sleeve of the A4 expansion screw into the punched hole.

Insert the cable into the cable socket, and insert the Wiegand cable into the Wiegand interface.

Cauon

If the cable needs to be connected from the side of the device, knock out the knockout hole on

one side.

Align the screw holes on both sides of the device with the sleeve in the wall and insert the

provided screws to

x the device.

DS-K2M061 Secure Door Control Unit User Manual

Figure 4-3 Install Secure Door Control Unit

DS-K2M061 Secure Door Control Unit User Manual

Appendix A. Dimension

Figure A-1 Dimension

DS-K2M061 Secure Door Control Unit User Manual

Appendix B. Communicaon Matrix and Device

Command

Communicaon Matrix

Scan the following QR code to get the device communicaon matrix.

Note that the matrix contains all

communicaon ports of Hikvision access control and video

intercom devices.

Figure B-1 QR Code of Communicaon Matrix

Device Command

Scan the following QR code to get the device common serial port commands.

Note that the command list contains all commonly used serial ports commands for all Hikvision

access control and video intercom devices.

Figure B-2 Device Command

DS-K2M061 Secure Door Control Unit User Manual

UD21173B-B

Hikvision DS-K2M061 Secure Door Control Module

Product's Documents

Hikvision DS-K2M061 User Manual

Specifications

Hikvision DS-K2M061 Questions and Answers