Loading ...
Loading ...
Loading ...
Note
●
For door staon, there are 4 I/O input terminals. By default, Terminal 1 and 2
correspond to Door Status. Terminal 3 and 4 correspond to interfaces of Door
Switch.
●
For door staon, there are 2 I/O Output Terminals. Terminal 1 and 2 correspond
to Door interfaces (NO1/COM/NC1; NO2/COM/NC2) of door staon. Door 1 is
enabled by default. You can enable/disable IO Out according to needs.
Volume Input and Output
Steps
1. Click Volume Input/Output to enter the volume input and output page.
2. Slide the slider to adjust the Volume Input and Volume Output.
3. Click Save to enable the sengs.
Face and Fingerprint Sengs
Steps
1. Click Face and Fingerprint to enter the sengs page.
2. Congure the parameters.
3. Click Save to enable the sengs.
Adversement Sengs
Steps
1. Click Adversement to enter the sengs page.
2. Select the Mode.
3. Click + to add the picture.
4. Slide to set the duraon.
5. Click Save to enable the sengs.
Video Intercom Face Recognion Door Staon User Manual
33
Loading ...
Loading ...
Loading ...