Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/79908478-ds-k1t321mx/bg50.png)
Select an authencaon mode according to your actual needs from the drop-down list.
Connuous Face Recognion Interval (s)
You can set the interval between 2 connuous recognion of a same person during the
authencaon. In the congured interval, Person A can only recognized once. If another
person (Person B) has recognized during the interval, Person A can recognized again.
Authencaon Interval
You can set the authencaon interval of the same person when authencang. The same
person can only authencate once in the congured interval. A second authencaon will be
failed.
Alarm of Max. Failed Aempts
Enable to report alarm when the card reading aempts reach the set value.
Main Interface Mode
You can set the Main Interface Mode as Authencaon Mode or Simple.
Communicaon with Controller Every
When the access control device cannot connect with the card reader for longer than the set
me, the card reader will turn oine automacally.
Max. Interval When Entering Password
When you entering the password on the card reader, if the interval between pressing two
digits is longer than the set value, the digits you pressed before will be cleared automacally.
OK LED Polarity/Error LED Polarity
Set OK LED Polarity/Error LED Polarity of the access control device according to the card
reader parameters. Generally, adopts the default sengs.
Enable Tampering Detecon
Enable the an-tamper detecon for the card reader.
Enable Card No. Reversing
The card No. will be in reverse sequence aer enabling the funcon.
Set Door Parameters
Tap → Access Control → Door Parameters .
DS-K1T321 Series Face Recognion Terminal User Manual
66
Loading ...
Loading ...
Loading ...