Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/88873793-gv-bx4700-fd/bg4a.png)
Important:
1. If
Dynamic IP Address or PPPoE is enabled, you need to know
which IP address the camera will get from DHCP server or ISP
to log in. If your camera is installed in the LAN, use the GV-IP
Device Utility to look up its current dynamic IP address. See
5.2.1 Checking the Dynamic IP Address in the Quick Start
Guide. If your camera uses a public dynamic IP address via
PPPoE, use the dynamic DNS Service to obtain a domain name
that is linked to the camera’s changing IP address first. For
details, see LAN Configuration and Advanced TCP/IP sections,
Administrator Mode Chapter in the GV-IPCAM Firmware
Manual.
2. If
Dynamic IP Address or PPPoE is enabled and you cannot
access the camera, you may have to reset the camera to its
factory default and then perform the network settings again. To
restore factory settings, see 1.6, 2.6, 3.5, 4.5. Loading Factory
Default.
62
Loading ...
Loading ...
Loading ...