Loading ...
Loading ...
Loading ...
1.4.2 Infrared Illuminators (Optional)
If you use an infrared (IR) illuminator with I/O function, follow the steps
below to install it.
1. Connect the infrared illuminator to the terminal block on the camera.
See 1.5 The I/O Terminal Block.
2. Access the Web interface of the camera.
3. Select
Video and Motion, select Video Settings, select Streaming 1
and set the
IR Check Function setting to Trigger by Input.
4. Click
Apply.
For details on the
Trigger by Input function, see 4.1.1 Video Settings, GV-
IPCam Firmware Manual.
18
Loading ...
Loading ...
Loading ...