Vinotemp VT18PR28 Owner's Manual

Loading ...

WWW.VINOTEMP.COM

• When the unit is plugged in for the first time, the unit will power up automatically to the

preset defaults. The preset temperature at the factory for UPPER temperature zone is 10ºC

(50ºF) and for LOWER temperature zone is 16ºC (60ºF).

• You can press the left side UP and DOWN keys to control the internal temperature of the

UPPER temperature zone and press the right side UP and DOWN keys to control the

internal temperature of the LOWER temperature zone. When you press either key at the

first time, the display will show the last temperature set previously.

• IMPORTANT: The temperature set for the LOWER temperature zone must always be just

as high as or higher than that in the UPPER temperature zone. For optimal performance, the

set temperature of the two zones should differ by at least 4°C (7F°).

• The temperature that you desire to set will increase 1ºC or 1ºF if you press the UP key once,

on the contrary the temperature will decrease 1ºC or 1ºF if you press the DOWN key once.

The display flashes while you make the setting.

• After the temperature has been set, the display shows the current inner temperature of the

particular temperature zone.

• To view the set temperature at any time, press the UP or DOWN key, the set temperature

will temporarily ﬂash in the display for 5 seconds. Then the display shows the current inner

temperature again.

INTERIOR LIGHT

• The interior light makes it easy to view your items. Touching the LIGHT mark toggles

between 2 modes of operation for the internal lights: functional (default) mode and

showcase mode. If you are in functional (default) mode, the lights will turn on only when

the door is open. If you are in showcase mode, the lights will be on whether or not the door

is open.

NOTE: When using the unit for the first time or after a long period of inactivity, there may be

a variance of a few degrees between the selected temperature and the temperature indicated

on the LED readout. This is normal due to the length of inactivity, and will correct itself after

the unit is run for a few hours. If the unit is unplugged, has lost power or is turned off, wait 3

to 5 minutes before restarting the unit. The unit will not restart before this time delay.

DYNAMIC COOLING/SILENT MODES

The Dynamic Cooling feature enables the temperature to be distributed evenly around the

interior so you can store all your goods under exactly the same excellent conditions.

In the Dynamic Cooling mode, the interior fan circulates the inside air evenly even when the

set temperature is reached. Dynamic Cooling mode is NOT the factory preset mode because of

creating noises and more energy consumption. To change to Dynamic Cooling mode, touch and

hold the DOWN key for approximately five seconds. The appliance will beep five times to

confirm Dynamic Cooling mode is on. To change back to default (Silent) mode, touch and hold

the UP key for approximately five seconds. The appliance will beep three times to confirm

default (Silent) mode is on.

Loading ...

Vinotemp VT18PR28 18 Inch Built-In Dual Zone Wine Cooler