Loading ...
Loading ...
Loading ...
13
17621 South Susana Road, Rancho Dominguez, California 90221
info@vinotemp.com
holes on the right hand side.
5. Screw the alternative left top hinge (6), included in the fittings, on the left hand side of the
cabinet. (Fig. 3)
6. Rotate the door 180° and relocate it to the designated position. Then screw the bottom
hinge assembly on the left designated position and tighten it after the door is leveled. (Fig.
4)
OPERATING YOUR APPLIANCE
CONTROLS
ON/OFF Power
To turn the appliance off, press and hold the key for 5 seconds until temperature
display goes out. To turn the appliance on, press and hold the key for 1 second until
temperature display lights up.
NOTE: Pressing the POWER key once can switch off the audible alarm when the alarm is
on.
LIGHT
Turn the interior light ON/OFF.
UP ▲
Used to increase (warm) the set temperature by 1°C/1ºF.
DOWN ▼
Used to decrease (cool) the set temperature by 1°C/1ºF.
ºF/ºC Selector
Select the temperature display setting in Fahrenheit or Celsius degree. To change the
temperature from Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the
LIGHT key for 5 seconds.
SETTING THE TEMPERATURE
• The unit has two separate temperature zones. The temperature of both zones can be set
between 5ºC and 22ºC (41ºF and 72ºF). It can be used as a wine maturing cabinet or a
wine serving cabinet. For maturing wine, the recommended temperature setting ranges of
both zones should be between 11ºC and 14ºC (52ºF and 57ºF). For serving wine, the
recommended temperature setting range of UPPER zone should be between 5ºC and 10ºC
(41ºF and 50ºF) which is ideal for serving champagne & white wine and the recommended
temperature setting range of LOWER zone should be between 15ºC and 22ºC (58ºF and
72ºF) which is ideal for serving red wine.
Loading ...
Loading ...
Loading ...