FLUKE 1745-BASIC User Manual for the Fluke 1745-BASIC Three Phase Power Quality Logger - Memobox

Loading ...

1745

Users Manual

Table 4. 1745 Power Quality Logger - Controls and Indicators (cont)

Item Name Description

Connector for Flexi

Set or current

clamps

Flexi sets or current clamps are detected

automatically at power-up. If you change the

current probe type, be sure to remove and

restore power so the Logger will detect the

new current probe.

Nominal ranges for the Flexi Set are 15 A,

150 A, 1500 A, and 3000 A AC. Nominal

input for current clamps is 0.5 V.

RS232 interface port The serial RS232 interface is used to

communicate with a PC. The Logger is

connected to the PC’s serial port (or a

modem for remote communication) using

the interface cable. Use a USB adapter if

necessary.

Logging Status LED

Yellow blinking = Logging job not set up yet,

or waiting for start time or START button.

Green blinking = logging is in progress

Steady green = Logging session is finished.

Data are ready to upload to a PC.

8 Channel LEDs The logging channel LEDs indicate

whether the applied voltages are within the

nominal range set using the PQ Log

software.

Red = Overload

Green = OK

Yellow = Underload

(There is no detection for the current input)

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE 1745-BASIC Three Phase Power Quality Logger - Memobox