Loading ...
Loading ...
Loading ...
Rinnai 12 Split AC OM
LARGE TEMPERATURE DISPLAY
The set and current room temperatures can be displayed via a large digital display
that is built into appliance and illuminates through the front cover of the indoor unit�
To turn the display on
1� Press the "ON/OFF" button to turn on appliance�
2� Press the "DISPLAY" button, to activate the large digital temperature display.
3� Press the "DISPLAY" button again, to deactivate the large digital temperature
display�
NOTE
The large temperature display will display the same temperature setting as that currently in use
by remote control.
When the room temperature mode is selected any changes to the set temperature will ash
on the display for 5 seconds, after which the display will revert to displaying the current room
temperature.
AUTO FRESH
Cooling and dehumidifying operations, can generate moisture inside the appliance.
Using the "FRESH" function removes such moisture by allowing the fan to run for 3
minutes after every shut-down, avoiding odours and keeping the unit fresh.
1� With the appliance "OFF" press the "FRESH" button, "Anti-F" is shown on the
LCD screen�
2� Pressing the "FRESH" button again will cancel the mode, "FRESH" will no
longer be shown on the LCD screen.
NOTE
This function will not operate in TIMER OFF or SLEEP modes.
SPOT SWING
1� Press the "SWING
↔
" button�
2� There are 5 pre-set xed air ow directions available, pressing the “SPOT
SWING” button will allow you to cycle through each of these xed directions.
3� To select a different xed direction or to return to continuous circulation press
the “SPOT SWING” button until the desired xed direction is achieved or until
the swing icon is again displayed.
CAUTION
DO NOT attempt to adjust the air deector louvre manually as this
can result in damage to the louvre movement mechanisms.
ECONOMY (COOLING ONLY)
In this mode the appliance automatically sets the operation to achieve the most
economical cooling of the room�
1� Press the "ON/OFF" button to turn on appliance and select a cooling mode�
2� Press the "ECO" button, the appliance will run in ECO mode.
3� Pressing the “ECO” button again will cancel the mode, “ECO” will no longer
be shown on the LCD screen.
NOTE
ECO mode operation runs for an 8 hour period, after which normal cooling operations will be
resumed, to restart ECO mode after this period repeat step 2 above.
Be aware that ECO mode cooling times may be longer than those for non ECO mode cooling.
H
ON
LRSWING
COOL
POWERCON
iFEEL
SWING
OFF
Anti-F
H
ON
LRSWING
POWERCON
iFEEL
SWING
OFF
H
ON
LRSWING
POWERCON
iFEEL
SWING
OFF
H
ON
LRSWING
POWERCON
iFEEL
SWING
OFF
H
ON
LRSWING
POWERCON
iFEEL
SWING
OFF
H
ON
LRSWING
POWERCON
iFEEL
SWING
OFF
H
ON
LRSWING
POWERCON
iFEEL
SWING
OFF
C
H
ON
LRSWING
ECO
COOL
POWERCON
iFEEL
SWING
SPEED
OFF
RUN
ADVANCED OPERATION
Loading ...
Loading ...
Loading ...