Loading ...
Loading ...
Loading ...
en-us Basic settings
20
Basic settings
13 Basic settings
Basic settings
You can configure the basic settings for your appliance to meet your needs.
13.1 Overview of the basic settings
The basic settings depend on the features of your appliance.
Basic setting Selection Description
Rinse aid disp. Scale with 4 levels Set or switch off the amount of rinse
aid to be dispensed.
→
"Setting the amount of rinse aid",
Page13
Intensive drying On
Off
1
Switch intensive drying on or off for
each operation.
The temperature in the final rinse is
increased for a better drying result.
This may increase the run time slightly.
Note:Please take care with delicate
dishware.
→
"Setting intensive drying", Page20
Signal volume Scale with 4 levels Adjusting the signal volume.
→
"Setting the signal volume",
Page21
Wi-Fi On
Off
1
Switch the wireless network connection
on or off.
→
"Setting Wi-Fi", Page20
The basic setting is not available until
you have connected the appliance with
the HomeConnect® app.
→
"HomeConnect® ", Page21
Factory setting Reset Restore changed settings to the factory
settings.
The settings for initial use must be
configured.
1
Factory setting (may vary according to model)
Tip:Connect your appliance to a mobile device. You can
conveniently change all settings using the
HomeConnect® app.
→
"HomeConnect® quick start", Page22
Setting intensive drying
1. Press
.
2. To open the appliance settings, press
button for 3
seconds.
1 2 3
A
A
a The refill indicator for rinse aid flashes.
3. Press
button repeatedly until the Clean and Sanitize
LEDs flash.
4. Press
button repeatedly until the LED (1) lights up.
1 2 3
A
1
If the LED is not lit up, intensive drying is switched off.
If the LED is lit up, intensive drying is switched on.
5. To store the settings, press
button for 3 seconds.
Setting Wi-Fi
1. Press .
Loading ...
Loading ...
Loading ...