Loading ...
Loading ...
Loading ...
FLEXIDOME multi 7000i IR Installation | en 15
Bosch Security Systems B.V.
Installation manual
2023-02 | 02 |
i
Notice!
The plugs and screws for surface mounting are not supplied with the camera.
5.1.1 Installing the mounting plate without conduit
1. Remove the mounting plate from the box.
2. Position the mounting plate with the center hole on top of the cable exit on the surface,
and mark the positions of the screw holes on the surface.
For standard installation, use the mounting holes marked with a B on the mounting plate.
For a different installation, for example for an installation on an electrical box, use
different mounting holes. For more information, refer to
Installing the mounting plate,
page 14
.
3. Use 4 screws that are suitable for the surface and the type of installation. If needed for
the surface, drill 4 holes to fit plugs. Make sure that the plugs fit tightly. Use the
appropriate diameter drill to support 5-6mm (0.2inch).
4. Put the cable through the center hole of the mounting plate.
5. Attach the mounting plate to the surface with 4 screws.
5.1.2 Installing the mounting plate with conduit (NDA-7051-CA)
For installation with conduit, use the NDA-7051-CA Conduit adapter M25 (sold separately).
NDA-7051-CA contains 5 conduit adapters. Use one conduit adapter per camera.
1. Remove one conduit adapter from the box.
2. Mark the position of the hole on the surface.
3. Use a screw that is suitable for the surface and the type of installation. If needed for the
surface, drill a hole to fit a plug. Make sure that the plug fits tightly. Use the appropriate
diameter drill.
Loading ...
Loading ...
Loading ...